Viewing entries tagged
silicagel

Comment

Importance of Corrosion Protection During Storage and Transportation

Products that are transported for a longer period of time or stored for an extended period are often in need of corrosion protection. Corrosion protection packaging prevents corrosion without having to treat the metal with oil, grease or paint.

ThinkstockPhotos-476204193.jpg

Corrosion is a significant problem in the handling, storage and shipping of products. Bare metal parts corrode easily. Temperature changes, contaminated air, sea salt and moisture, all create corrosion. 

Due to temporary corrosion, time is diverted to handling complaints and customer loyalty is potentially lost. Delayed deliveries due to reworking of corroded components translate to avoidable losses. Therefore, planning for corrosion protection during temporary storage and transportation is a logical strategy to minimize these losses.

There are several different solutions for protecting the product from corrosion depending on parameters such as: product type, means of transportation, and the length of the transit time.

The Importance of Temporary Corrosion Protection

There are many industrial applications where temporary corrosion protection during transit and storage is critical for the final processing and end use of parts and components. If semi-finished or machined components are left unprotected, or roller bearings are not coated with a rust inhibitor during storage, or internal combustion engines are transported and stored without corrosion prevention, then they may deteriorate or become damaged due to corrosion. Any subsequent rust removal will not restore a component to its original quality and geometrical accuracy. 


Permanent corrosion protection cannot be used for temporary applications because it must be removed before further processing or assembly. Because corrosion can appear within hours or days a temporary corrosion prevention method must be implemented.

During transportation and storage, fasteners (e.g., wedges, springs, bolts, nuts, washers, screws) and associated tools require protection from corrosive chemical reactions on their surfaces. 

General Care for Preventing Corrosive Deterioration

Desiccants to control air humidity are used to prevent corrosive deterioration during storage and transport. Silica gels and molecular sieves are occasionally used as desiccants to absorb excess air moisture. Sealed films of high pressure polyethylene and special waterproof and airproof packaging systems are used for critical applications.

Cost, Safety and Health

Allowing temporary corrosion and rust on materials during interstage processes and transportation is costly due to the direct and indirect costs involved in rework and warranty damages. When carefully chosen, preventive solutions are cost effective for both application and subsequent removal.

For confined spaces, authorized specialists must be consulted. Ensure compliance with personal protective equipment (PPE) and firefighting regulations.

The combustion products of coatings can be highly toxic. Hence exposure control must be planned for in advance. Precautions should be taken to avoid eye contact and skin exposure with proper PPE suitable for the application method used. Respiratory protection might be needed in a few cases.

Comment